# Saving Calibration for a series

**URL:** https://discourse.orthanc-server.org/t/saving-calibration-for-a-series/4160
**Category:** General
**Created:** [December 21, 2023, 8:38pm UTC](https://discourse.orthanc-server.org/t/saving-calibration-for-a-series/4160 "2023-12-21T20:38:42Z")
**Posts on this page:** 4
**Page:** 1

<div class="post-metadata">

### Author: ![esk](https://discourse.orthanc-server.org/letter_avatar_proxy/v4/letter/e/bbce88/32.png) [@esk](https://discourse.orthanc-server.org/u/esk)
#### Post date: [December 21, 2023, 8:38pm UTC](https://discourse.orthanc-server.org/t/saving-calibration-for-a-series/4160/1 "2023-12-21T20:38:43Z")

</div>

When using calibration and saving measurements (creating series report), once the DCM is re-loaded, the calibration measurement no longer exists. Is this expected behavior or should it be re-loaded with the report?

Thanks

---

<div class="post-metadata">

### Author: ![alainmazy](https://discourse.orthanc-server.org/user_avatar/discourse.orthanc-server.org/alainmazy/32/1576_2.png) [@alainmazy](https://discourse.orthanc-server.org/u/alainmazy)
#### Post date: [December 22, 2023, 7:31am UTC](https://discourse.orthanc-server.org/t/saving-calibration-for-a-series/4160/2 "2023-12-22T07:31:26Z")

</div>

**Hi,**

> [@esk](#):
>
> When using calibration and saving measurements (creating series report)

How ? In what tool ? Orthanc does not provide these functionalities !

So if you are using an external tool for that, you very likely need to configure this external tool to push the newly generated data to Orthanc - nothing magic here around.

Best regards,

Alain.

---

<div class="post-metadata">

### Author: ![esk](https://discourse.orthanc-server.org/letter_avatar_proxy/v4/letter/e/bbce88/32.png) [@esk](https://discourse.orthanc-server.org/u/esk)
#### Post date: [December 22, 2023, 1:23pm UTC](https://discourse.orthanc-server.org/t/saving-calibration-for-a-series/4160/3 "2023-12-22T13:23:18Z")

</div>

Thanks for the reply and clarification. Ohif viewer.

---

<div class="post-metadata">

### Author: ![jodogne](https://discourse.orthanc-server.org/user_avatar/discourse.orthanc-server.org/jodogne/32/1511_2.png) [@jodogne](https://discourse.orthanc-server.org/u/jodogne)
#### Post date: [January 3, 2024, 9:06am UTC](https://discourse.orthanc-server.org/t/saving-calibration-for-a-series/4160/4 "2024-01-03T09:06:08Z")

</div>

Hello,

> [@esk](#):
>
> Thanks for the reply and clarification. Ohif viewer.

As your question is related to OHIF and not to Orthanc, I invite you to ask it to the OHIF community: [https://community.ohif.org/](https://community.ohif.org/)

If there is something to be fixed in Orthanc after your discussion with the OHIF community, let us now.

Regards,  
Sébastien-