Orthanc Auto Retrieve

Hi

I recently installed an Orthanc PACS Server and connected it to conquest, and I recently found the OrthancTools made by Salimkanoun.

I have manage to connect the OrthancTools HTTP Setup to my Orthanc Server but when i do the Auto-Retrieve I dont get any results.
Screenshot 2021-01-26 080608.jpg

Ruki

Hi,first of all check that your getting the results you need in orthanc interface and your able to retrieve Dicom.
If not the problem is likely to be in your aet déclaration (orthanc default interface and orthanc tools rely on the same APIs)

Also check by removing the * , i put this wildcard by défault by its probably a mistake, as not filteering Query param should be empty. Tell me if its solve your issue and will fix this.

Please Also notice that this software is end of life and will be replaced by Orthanc tools js.
The auto retrieve will be much better in orthanctoolsjs.

Salim

Hi Salim

I have tried to run it again. Still no luck instead i have tried to install the OrthancToolsJS, but i have encountered an error.

I followed the documentation guide on how to install it, the nodejs version i have installed is node-v14.15.4-x64.

Then I gave the write permission for the OrthancToolsJS folder under root of C:\ and open the CMD as administrator then change directory from the C:\OrthancToolsJS and run the npm install after a while it gave me this error.

c:\OrthancToolsJS\node_modules\dtrace-provider>if not defined npm_config_node_gyp (node “C:\Program Files\nodejs\node_modules\npm\node_modules\npm-lifecycle\node-gyp-bin\…..\node_modules\node-gyp\bin\node-gyp.js” rebuild ) else (node “C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\bin\node-gyp.js” rebuild )
gyp ERR! find Python
gyp ERR! find Python Python is not set from command line or npm configuration
gyp ERR! find Python Python is not set from environment variable PYTHON
gyp ERR! find Python checking if “python” can be used
gyp ERR! find Python - “python” is not in PATH or produced an error
gyp ERR! find Python checking if “python2” can be used
gyp ERR! find Python - “python2” is not in PATH or produced an error
gyp ERR! find Python checking if “python3” can be used
gyp ERR! find Python - “python3” is not in PATH or produced an error
gyp ERR! find Python checking if the py launcher can be used to find Python 2
gyp ERR! find Python - “py.exe” is not in PATH or produced an error
gyp ERR! find Python checking if Python is C:\Python27\python.exe
gyp ERR! find Python - “C:\Python27\python.exe” could not be run
gyp ERR! find Python checking if Python is C:\Python37\python.exe
gyp ERR! find Python - “C:\Python37\python.exe” could not be run
gyp ERR! find Python
gyp ERR! find Python **********************************************************
gyp ERR! find Python You need to install the latest version of Python.
gyp ERR! find Python Node-gyp should be able to find and use Python. If not,
gyp ERR! find Python you can try one of the following options:
gyp ERR! find Python - Use the switch --python=“C:\Path\To\python.exe”
gyp ERR! find Python (accepted by both node-gyp and npm)
gyp ERR! find Python - Set the environment variable PYTHON
gyp ERR! find Python - Set the npm configuration variable python:
gyp ERR! find Python npm config set python “C:\Path\To\python.exe”
gyp ERR! find Python For more information consult the documentation at:
gyp ERR! find Python GitHub - nodejs/node-gyp: Node.js native addon build tool
gyp ERR! find Python **********************************************************
gyp ERR! find Python
gyp ERR! configure error
gyp ERR! stack Error: Could not find any Python installation to use
gyp ERR! stack at PythonFinder.fail (C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\find-python.js:307:47)
gyp ERR! stack at PythonFinder.runChecks (C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\find-python.js:136:21)
gyp ERR! stack at PythonFinder. (C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\find-python.js:225:16)
gyp ERR! stack at PythonFinder.execFileCallback (C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\find-python.js:271:16)
gyp ERR! stack at exithandler (child_process.js:315:5)
gyp ERR! stack at ChildProcess.errorhandler (child_process.js:327:5)
gyp ERR! stack at ChildProcess.emit (events.js:315:20)
gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:275:12)
gyp ERR! stack at onErrorNT (internal/child_process.js:465:16)
gyp ERR! stack at processTicksAndRejections (internal/process/task_queues.js:80:21)
gyp ERR! System Windows_NT 10.0.10240
gyp ERR! command “C:\Program Files\nodejs\node.exe” “C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\bin\node-gyp.js” “rebuild”
gyp ERR! cwd c:\OrthancToolsJS\node_modules\dtrace-provider
gyp ERR! node -v v14.15.4
gyp ERR! node-gyp -v v5.1.0
gyp ERR! not ok

sqlite3@4.2.0 install c:\OrthancToolsJS\node_modules\sqlite3
node-pre-gyp install --fallback-to-build

node-pre-gyp WARN Using request for node-pre-gyp https download
node-pre-gyp WARN Tried to download(403): https://mapbox-node-binary.s3.amazonaws.com/sqlite3/v4.2.0/node-v83-win32-x64.tar.gz
node-pre-gyp WARN Pre-built binaries not found for sqlite3@4.2.0 and node@14.15.4 (node-v83 ABI, unknown) (falling back to source compile with node-gyp)
gyp ERR! find Python
gyp ERR! find Python Python is not set from command line or npm configuration
gyp ERR! find Python Python is not set from environment variable PYTHON
gyp ERR! find Python checking if “python” can be used
gyp ERR! find Python - “python” is not in PATH or produced an error
gyp ERR! find Python checking if “python2” can be used
gyp ERR! find Python - “python2” is not in PATH or produced an error
gyp ERR! find Python checking if “python3” can be used
gyp ERR! find Python - “python3” is not in PATH or produced an error
gyp ERR! find Python checking if the py launcher can be used to find Python 2
gyp ERR! find Python - “py.exe” is not in PATH or produced an error
gyp ERR! find Python checking if Python is C:\Python27\python.exe
gyp ERR! find Python - “C:\Python27\python.exe” could not be run
gyp ERR! find Python checking if Python is C:\Python37\python.exe
gyp ERR! find Python - “C:\Python37\python.exe” could not be run
gyp ERR! find Python
gyp ERR! find Python **********************************************************
gyp ERR! find Python You need to install the latest version of Python.
gyp ERR! find Python Node-gyp should be able to find and use Python. If not,
gyp ERR! find Python you can try one of the following options:
gyp ERR! find Python - Use the switch --python=“C:\Path\To\python.exe”
gyp ERR! find Python (accepted by both node-gyp and npm)
gyp ERR! find Python - Set the environment variable PYTHON
gyp ERR! find Python - Set the npm configuration variable python:
gyp ERR! find Python npm config set python “C:\Path\To\python.exe”
gyp ERR! find Python For more information consult the documentation at:
gyp ERR! find Python GitHub - nodejs/node-gyp: Node.js native addon build tool
gyp ERR! find Python **********************************************************
gyp ERR! find Python
gyp ERR! configure error
gyp ERR! stack Error: Could not find any Python installation to use
gyp ERR! stack at PythonFinder.fail (C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\find-python.js:307:47)
gyp ERR! stack at PythonFinder.runChecks (C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\find-python.js:136:21)
gyp ERR! stack at PythonFinder. (C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\find-python.js:225:16)
gyp ERR! stack at PythonFinder.execFileCallback (C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\find-python.js:271:16)
gyp ERR! stack at exithandler (child_process.js:315:5)
gyp ERR! stack at ChildProcess.errorhandler (child_process.js:327:5)
gyp ERR! stack at ChildProcess.emit (events.js:315:20)
gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:275:12)
gyp ERR! stack at onErrorNT (internal/child_process.js:465:16)
gyp ERR! stack at processTicksAndRejections (internal/process/task_queues.js:80:21)
gyp ERR! System Windows_NT 10.0.10240
gyp ERR! command “C:\Program Files\nodejs\node.exe” “C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\bin\node-gyp.js” “configure” “–fallback-to-build” “–module=c:\OrthancToolsJS\node_modules\sqlite3\lib\binding\node-v83-win32-x64\node_sqlite3.node” “–module_name=node_sqlite3” “–module_path=c:\OrthancToolsJS\node_modules\sqlite3\lib\binding\node-v83-win32-x64” “–napi_version=7” “–node_abi_napi=napi” “–napi_build_version=0” “–node_napi_label=node-v83”
gyp ERR! cwd c:\OrthancToolsJS\node_modules\sqlite3
gyp ERR! node -v v14.15.4
gyp ERR! node-gyp -v v5.1.0
gyp ERR! not ok
node-pre-gyp ERR! build error
node-pre-gyp ERR! stack Error: Failed to execute ‘C:\Program Files\nodejs\node.exe C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\bin\node-gyp.js configure --fallback-to-build --module=c:\OrthancToolsJS\node_modules\sqlite3\lib\binding\node-v83-win32-x64\node_sqlite3.node --module_name=node_sqlite3 --module_path=c:\OrthancToolsJS\node_modules\sqlite3\lib\binding\node-v83-win32-x64 --napi_version=7 --node_abi_napi=napi --napi_build_version=0 --node_napi_label=node-v83’ (1)
node-pre-gyp ERR! stack at ChildProcess. (c:\OrthancToolsJS\node_modules\node-pre-gyp\lib\util\compile.js:83:29)
node-pre-gyp ERR! stack at ChildProcess.emit (events.js:315:20)
node-pre-gyp ERR! stack at maybeClose (internal/child_process.js:1048:16)
node-pre-gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:288:5)
node-pre-gyp ERR! System Windows_NT 10.0.10240
node-pre-gyp ERR! command “C:\Program Files\nodejs\node.exe” “c:\OrthancToolsJS\node_modules\node-pre-gyp\bin\node-pre-gyp” “install” “–fallback-to-build”
node-pre-gyp ERR! cwd c:\OrthancToolsJS\node_modules\sqlite3
node-pre-gyp ERR! node -v v14.15.4
node-pre-gyp ERR! node-pre-gyp -v v0.11.0
node-pre-gyp ERR! not ok
Failed to execute ‘C:\Program Files\nodejs\node.exe C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\bin\node-gyp.js configure --fallback-to-build --module=c:\OrthancToolsJS\node_modules\sqlite3\lib\binding\node-v83-win32-x64\node_sqlite3.node --module_name=node_sqlite3 --module_path=c:\OrthancToolsJS\node_modules\sqlite3\lib\binding\node-v83-win32-x64 --napi_version=7 --node_abi_napi=napi --napi_build_version=0 --node_napi_label=node-v83’ (1)
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@1.2.13 (node_modules\watchpack-chokidar2\node_modules\fsevents):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@1.2.13: wanted {“os”:“darwin”,“arch”:“any”} (current: {“os”:“win32”,“arch”:“x64”})
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.1.3 (node_modules\fsevents):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.1.3: wanted {“os”:“darwin”,“arch”:“any”} (current: {“os”:“win32”,“arch”:“x64”})

npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! sqlite3@4.2.0 install: node-pre-gyp install --fallback-to-build
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the sqlite3@4.2.0 install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:
npm ERR! C:\Users\TEST2\AppData\Roaming\npm-cache_logs\2021-01-27T10_18_42_220Z-debug.log

c:\OrthancToolsJS>

Yes there’s a compatibility issue with nodeJS implementation of sqlite and NodeJS14.
The version of OrthancToolsJS you downloaded should work with Node12.

Could you try to remove the * from all other fields except ‘CT’ in the java OrthancTools and tell me if it solve your problem ?

Hi Salim

From the Orthanc Tools, I have removed all * the result is still the same.

Screenshot 2021-01-27 104240.jpg

On the the other hand i was able to run the OrthancToolJS using nodejs-v12.13.0-x64. Following your guide I have managed to find the following items in the orthanc.json

“DicomModalitiesInDatabase”
“OrthancPeersInDatabase”

for the DICOM_WEB and below i didnt manage to find it.

Screenshot 2021-01-27 105534.jpg

Ruki